Overview
The Label Mill LM1510 and 1510HS automatic labeling systems make the setup and operation of label application easy not only with a wide range of optional features but the ability for use with left and right-hand models.
Designed for heavy-duty industrial use, this machine includes automatic setup, automatic label detect, missing label detect and advance, automatic speed compensation, and conveyor speed tracking.
For quick and easy system adjustments, the 1510 comes with an optional hand-held user interface that can control many of the standard features. Some features include: a batch counter, job storage, and operational modes.
With a variety of I/O points, this equipment allows for integration to scales, bar-code scanners, product diverters, automatic machines, conveyor lines, remote trigger, tamp synchronization, and indicator signals (low label, broken web, batch done, and more).
Bumping up the speed, accuracy, and dependability, the high speed servo motor drive in the LM1510 outperforms most other standard label applicators.
Features
Label Mill 1510/1510 HS Features:
- Speeds up to 2400 Inches a Minute
- Close Loop Servo Drive System
- 12 & 16 Inch Label Storage Spool Standard
- Swing Away Tamp Assemble
- User-Friendly Operating Software
- Automatic Set-Up
- Batch Counter
- Job Storage
- Missing Label Detect
- Left and Right-Hand Designs
- 15 Auxiliary I/O Points (Factory Programmable)
- Hand Held User Interface
Additional Options:
- Touch Screen User Interface
- Serial Interface Ports (Two / Factory Programmable)
- Encoder Port / Conveyor Interface
- Dual Trigger Inputs
- Power Unwind Label Storage Spool
- Either-Net Interface (Factory Programmable)
- Tandem Labelers / Zero Down time
- System Status Light Tower
- Smart Tamp
- Optional Loose Loop Interface to Thermal Printer
Specifications
Label Mill 1510 Specifications:
- Labeling Speed/Rate: Up to 1500 linear inches per minute.
Appx 250 labels per minute, depending on label and product size. - Interface Sensors: Product sensor – photo eye/limit switch/PLC input
- Label Placement: Up to +/- 1/32″
- Electrical: 115 VAC / 60Hz – 10 amps
- Label Roll Capacity: 12″ maximum outside diameter wound on 3″ ID core
- Air Requirements: 80 psi/3 cfm when equipped with tamp, flag, blow, swing,
or corner wrap - Label Size: Minimum 1/2″ wide x 1/2″ long
Maximum 6 1/2″ wide x 12″ long - Application Method: Tamp, wipe-on, flag, blow, corner-wrap, swing tamp
- Environment: Operating 50-90°F, 15-85% HR, non-condensing
- General Size: 25″W x 22″D x 21″H
- Weight: 60 lbs. with u-arm
- Additional Options: Touch screen, alarm beacon, low label, broken web, power
unwind for larger spools, left-hand models, custom programming
Label Mill 1510H Specifications:
- Labeling Speed/Rate: Up to 2400 linear inches per minute.
Appx 500 labels per minute, depending on label and product size. - Interface Sensors: Product sensor – photo eye/limit switch/PLC input
- Label Placement: Up to +/- 1/32″
- Electrical: 115 VAC / 60Hz – 10 amps
- Label Roll Capacity: 16″ maximum outside diameter wound on 3″ ID core
- Air Requirements: 80 psi/3 cfm when equipped with tamp, flag, blow, swing,
or corner wrap - Label Size: Minimum 1/2″ wide x 1/2″ long
Maximum 6 1/2″ wide x 12″ long - Application Method: Tamp, wipe-on, flag, blow, corner-wrap, swing tamp
- Environment: Operating 50-90°F, 15-85% HR, non-condensing
- General Size: 25″W x 22″D x 21″H
- Weight: 65 lbs. with u-arm
- Additional Options: Touch screen, alarm beacon, low label, broken web, power
unwind for larger spools, left-hand models, custom programming
Maintenance
Shorr Packaging stands behind all the packaging equipment we represent, with a service network that extends throughout the contiguous U.S.
Our packaging automation specialists offer complete support for equipment selection, integration, installation, training, maintenance, 24/7 emergency service and parts procurement.
All of Shorr’s service technicians are factory certified and dedicated to ensuring that your packaging equipment is always operating at peak performance.
